CODEHOUND Reports

Fire protection inspection software

Coming soon

Inspect it, send it, quote the repairs. All before you’re back at the shop.

CodeHound Reports is inspection software for fire protection companies. Your techs fill out sprinkler, fire alarm, extinguisher, kitchen suppression and hood inspections on a phone or tablet. The office gets the report, the photos and every deficiency, ready to send, quote and invoice.

One email, when we open the doors. No spam.

✓ You’re on the waitlist. Thanks.

Field Notes

CodeHound Reports · Pre-launch
StatusIn field testing
AccessWaitlist open
ReportsInspections · Hood cleaning
AppsField · Office · Portal
DeficienciesTracked until fixed
Built byA working inspector
Standards in scope
251072111717A96200180

Where the time goes now

The paperwork rides around in the truck for a week, then shows up half filled out and hard to read. The customer waits on the report, and you wait to send the invoice.

A bad gauge or a corroded head gets written up, and then nobody quotes it. Next year it’s on the report again and the repair never happened.

The property manager calls because they need last year’s report for the fire marshal, and you end up digging through old email to find it.

How it works

One inspection, start to finish

  1. Your tech inspects

    They pick the building and the system and get the right checklist for that building’s code year. They mark it up, add readings and photos, and write up deficiencies on the spot.

  2. The office follows up

    The finished inspection lands in the office with everything attached. Turn the deficiencies into a quote, book the repair and send the invoice.

  3. Your customer gets the report

    They get a clean PDF and their own portal with past reports, quotes, invoices and your next visit. Notes meant for the office stay off their copy.

Features

From inspection to paid invoice

Deficiencies become repair work

Write it up when you find it. It stays open on every visit until it’s fixed, and the office can turn it into a quote in a couple of clicks.

Reports your customers can read

Clean PDF reports with your company’s details, photos and every deficiency spelled out. Office notes never end up on the customer’s copy.

The right form for the code year

Set each building to the edition its AHJ enforces, one standard at a time, and the checklist matches.

Every system you service

Sprinklers, standpipes, fire pumps, fire alarm, extinguishers, kitchen and dry chem suppression, clean agent, foam, fire doors, backflow and hood cleaning.

Fire pump tests on the spot

Enter your churn, 100% and 150% readings and the pump curve draws right there, with last year’s test on top so you can see a pump losing ground.

The office side

Plan the week on a map, book visits, track repair jobs and send invoices with automatic payment reminders. Your customers get a portal, so they stop calling for copies.

The field app doesn’t need cell signal. Techs can finish an inspection in a basement and it syncs when they’re back in range.

Standards covered

Standards and code years

Each building gets its own code year for each standard, so a town on 2017 and a town on 2023 can sit side by side on the same schedule.

NFPA 25Sprinklers, standpipes, fire pumps, water tanks and valves2011–2026
NFPA 72Fire alarm and signaling systems2016–2025
NFPA 10Portable fire extinguishers2013–2026
NFPA 17AKitchen (wet chemical) suppression systems2017–2024
NFPA 96Kitchen exhaust systems and hood cleaning2014–2024
NFPA 17Dry chemical suppression systems2017–2024
NFPA 2001Clean agent suppression systems2018–2025
NFPA 11Foam systems2016–2024
NFPA 80Fire doors and other opening protectives2016–2025
BackflowBackflow prevention assembly testing

The checklists are written in our own words. We don’t copy NFPA text.

Who it’s for

Any shop that works on fire protection

CodeHound is for any company that inspects, tests or services fire protection systems: sprinkler contractors, fire alarm companies, extinguisher and kitchen suppression shops, hood cleaners, and the full-service outfits that do a little of everything.

A working inspector built it, so it follows the way a job really runs, from the tech on site to whoever sends the invoice.

FAQ

Common questions

What is CodeHound Reports?

It’s inspection software for fire protection companies. Your techs use it on a phone or tablet to inspect sprinklers, fire alarm, extinguishers, kitchen suppression, hoods, backflow and more. Your office uses it in a web browser to send reports, quote repairs and invoice, and your customers get a portal with all their paperwork.

What kinds of inspections can I do with it?

Sprinklers and standpipes, fire pumps and tanks (NFPA 25), fire alarm (NFPA 72), extinguishers (NFPA 10), kitchen and dry chemical suppression (NFPA 17A and 17), kitchen exhaust and hood cleaning (NFPA 96), clean agent (NFPA 2001), foam (NFPA 11), fire doors (NFPA 80) and backflow testing. You pick the code year each building’s AHJ enforces and the checklist matches it.

Can I bring my buildings over from the software I use now?

Yes. Export your customers and buildings from your current software or a spreadsheet, match up the columns, and look everything over before anything gets saved.

Can I get my data out if I leave?

Any time. One button gives you a zip with your buildings, systems, inspections and deficiencies as spreadsheets, plus all your photos.

Can I send the reports to my AHJ or fire marshal?

Reports come out as PDFs, which is what most fire marshals and reporting portals want. The app also gives you a short summary of the inspection you can paste into your jurisdiction’s submission form.

What devices does it run on?

Your techs can use an iPhone, an iPad, or an Android phone or tablet. The office and your customers just need a web browser.

Does it need cell signal?

No. Techs can finish an inspection with no signal, and it syncs when they’re back in range.

How much will it cost, and when can I get it?

We’re field testing it now, so it isn’t for sale yet. We’ll share pricing when we launch. Join the waitlist and we’ll send you one email when it’s ready.

Want a look when it launches?

Join the waitlist